网站首页
营业项目
产品目录
供求信息
客户实绩
联系我们
产品目录 
产品目录
Engineering Plastic 工程塑胶
Engineering Plastic 工程塑胶
Engineering Plastic 工程塑胶
Engineering Plastic 工程塑胶
Engineering Plastic 工程塑胶
Engineering Plastic 工程塑胶
Engineering Plastic 工程塑胶
型号︰WST-E.Plastic
品牌︰WSTech.
原产地︰台湾
单价︰-
最少订量︰1 件

 共有 18 相关信息  
上一个45678下一个
自动翻页︰   秒播放

产品描述
性质 ASTM 超高分子
聚乙烯
UHMW-PE
聚乙烯
PE
聚丙烯
PE
氯乙烯
SHORE
塑胶钢
ACETAL
尼龙6
NYLON
MC
尼龙
CAST NYLOM
铁氟龙
PTFE
ABS PC
比重
Specific gravity
D792 0.94 0.941-0.965 0.902-0.910 1.30-1.58 1.41 1.12-1.14 1.15-1.17 2.14-2.20 1.03 1.2
抗拉强度
p.s.i Tensile
strength
D638 2500-3500 3100-5500 4300-5500 6000-7500 8800 11800-10000 11000-14000 2000-5000 4600
伸长率 %
Elongation
D638 500 20-1300 200-700 40-80 40-75 100a-300b 30-320 300-400
压缩强度
p.s.i
Comprehension
strength
D695 2400 2700-3600 5500-8000 8000-13000 16000(10% defl.) 13000 - 1700
冲击强度
Impact strength
(1/2×1/2 in .notched)
D256 No break 0.5-20.0 0.5-2.2at(1/8*1/2 inbar) 0.4-20.0 1.0-1.5(1/2*1/2 inbar) 1.0a-3.0b 0.8-3.0(1/2*1/2 inbar) 3.0
硬度
Hardness,
Rockwell
D785 D60-70
(Shore)
D60-DD70
(Shore)
80-110 65-85
(Sgire D)
M78-M80 R119 R95 -R1220 D50-D55
(Shore)
R86
抗折模数
105p.s.i 73℉
Flexural Modulus
D790 1.30-1.40 1.0-2.6 1.7-2.5 3-5 3.75 3.9a-1.4b 1.1-4.5a
0.8-1.6b
- 2.3 -
磨擦系数
Coefficient
of friction
- 0.080.18 0.3 0.45 0.18 0.37 0.35 0.040.1 0.38
热传导率
-104cal sec cm3
cm Thermal
conductivity
C177 11-12.4 11.0-12.4 2.8 3.5-5.0 5.5 5.8 - 6.0 1.7-2.1 4-6
热膨胀率
Thermal expansion
105 per℃
D696 7.2 11.0-13.0 5.8-10.2 5.0-10.0 8.5 8.3 9.0 10.0 7.4 7
耐热温度
Resistance
to heat ℃
120℃ 80℃ 110℃ 65℃
75℃
80℃
120℃
80℃
120℃
121℃
149℃
260℃ 70-100 121
体积抵抗
W-cm(23 ℃50%)
Volume resitivity
D257 1016 1016 1016 1016 1.0*1014 1.0*1014 - 1018 9-1015 .1*1016
绝缘破坏强度
(短时间)
1/8-in.thickness volts
mil dielectric strength
D149 710 450-500 500-660 350-500 500
(90mil)
400 300-400 480 230
诱电率
1KHZ
Dielectric constant
D150 2.25-2.35 2.30-2.35 2.2-2.6 3.0-3.8 3.7 3.7 3.7 2.1 3.17
诱电损失
Dissipation
(power)factor
D150 0.00021 0.0005 0.0005-0.0018 0.009-0.0177 0.0010
(40mile)
0.02 0.02 0.0002 - 0.0021
吸水率
1KHZ Water
absorption
24hr3.2mm,
Thickness%
D570 0.001
0.01 0.01-0.03 0.04-0.4 0.02 1.3-1.9 0.6-1.2 0.00 0.30 0.15
燃烧速度
in min
Burning rate
D635 - 1.00-1.04 0.75-0.82 - 1.0-1.1 - - - - -
弱酸影响
Effect of
weak acids
D543 抗弱酸性强
VeryResistant
可抗弱酸Resistant 不受影响
None
不受影响None 因种类
而异Resistant to some
可抗弱酸Resistant 可抗弱酸Resistant 不受
影响
None
强酸影响
Effect of
strong acid
D543 受强氢化酸
侵袭
Attachedslowly
byoxidizing
acids
受强氧化酸
侵袭Attachedslowly byoxidizing
acids

受强氧化酸
侵袭Attachedslowly byoxidizing
acids

不受影响None 受侵袭Attached 受侵袭Attached 受侵袭Attached 不受
影响None
Resistant
(Limited)
弱硷影响
Effect of
weak Alkalis
D543 弱硷性强
Very resistance
抗弱硷性强Very resistant 不受影响
None
不受影响None 受影响 Attached 不受影响None 不受影响None 不受
影响None
Attached
强硷影响
Effect of
strong Alkalis
D543 抗强硷性强
Very resistant
抗强硷性强Very resistant 抗强硷性强Very resistant 不受影响None 受影响 Attached 抗强硷性resistant 抗强硷性resistant 不受
影响None
Attached
有机溶剂
影响
Effect of
organic
solvents
D543 耐80oC以下
有机溶剂
Resistantbelow 80℃
耐80oC以下
有机溶剂Resistantbelow 80℃
耐80oC以下
有机溶剂Resistantbelow 80℃
耐乙酸、脂族经化合物、机油溶剂、于酮类酯类中易溶化或收说缩,在芳香族经中易收缩。Resist Alcohol,aliphatic 一般有机
溶剂均可
耐用
Excellent resistance to practically
all solvents
一般有机溶剂均可耐用Excellent resistance to practically all solvents 一般有机溶剂均可耐用Excellent resistance to practically all solvents 不受
影响None
溶于氯化碳
化氢、稍溶
于芳香族,
碳化氢,酮
类酯类。
Soluble in
chlorinated hydrocarbons
Partially
soluble
产品图片
选择图片
Engineering Plastic 工程塑胶
Engineering Plastic 工程塑胶
Engineering Plastic 工程塑胶
Engineering Plastic 工程塑胶
Engineering Plastic 工程塑胶
Engineering Plastic 工程塑胶
相关产品
Hi-Fine Ceramics 高精密陶瓷
Hi-Fine Ceramics 高精密陶瓷
Precious Metal 稀贵金属
Precious Metal 稀贵金属
Fitting,Tubing,Valve 软管/阀件/接头
Fitting,Tubing,Valve 软管/阀件/接头
Metal Manufactures 金属加工件
Metal Manufactures 金属加工件

Powered by DIYTrade.com  自助企业建站,完全免费!